ScanCar guides
OBD2 Freeze Frame: Save the Evidence Before Clearing a Code
ScanCar editorial team · Updated 19 November 2026
Freeze frame is a snapshot of selected conditions stored with a fault. Live data shows what the car reports while you are connected. Save the snapshot before you erase anything: the same fault may be hard to reproduce later, and today's idle reading may have little to do with the conditions when it appeared.
Capture the code and the snapshot together
- Park safely and follow the car and reader instructions. Open the generic engine-code list and record the exact code, its status and the dashboard symptom.
- Open the freeze-frame menu. Copy the code associated with the frame if it appears. If you see multiple codes but only one frame, do not assume it describes all of them.
- Capture all the frame screens or write each value with its unit. Start with engine speed, coolant temperature, vehicle speed and calculated load where available. Keep the parameter's full label; “temperature” alone is ambiguous.
- Separately record the scan date, odometer reading and when you noticed the symptom. Those are your observations; the stored frame may not include the time or distance at which it was recorded.
A record you can hand to a garage
Illustration only, with made-up values: “Frame says P0300; engine speed 2,140 rpm; coolant 74 °C; road speed 46 km/h; calculated load 41%; fuel trims not displayed. I noticed a brief hesitation after setting off.” The values describe a situation to investigate. They do not identify a failed coil or prove what caused the hesitation.
Use “not shown” for missing fields. If the tool says no freeze frame, keep the code and your symptom notes. Do not put zero into the report for a value the reader did not display, and do not assume a missing frame means the car is fault-free.
What to do with the record
Keep the original report and add a separate entry after any repair. The VD31 manufacturer lists freeze-frame retrieval for supported OBD2/EOBD vehicles, though the car determines what is available. For the next decision, follow the read, record and repair sequence before clearing an engine code. If the warning is urgent, follow the vehicle handbook and get help first.