Skip to content

ScanCar guides

OBD Live Data Says N/A or Zero: Unsupported, Unavailable or Measured?

ScanCar editorial team · Updated 20 November 2026

N/A, unsupported, blank and zero are not interchangeable. A car can connect successfully and provide engine codes while supplying only some of the live-data fields listed by the reader. Treat an unavailable measurement as unknown until its meaning is established.

Separate connection from parameter support

Generic OBD defines ways to report supported parameter groups. A tool can therefore have a menu containing more items than a particular vehicle provides. The support response, tool decoder and current operating state all matter. A list of possible PIDs is not a specification for every engine.

First confirm you are in the intended engine/emissions session. Then note the exact label, unit and message. If the tool reports a genuine numerical zero, check whether that is plausible with the engine stopped or the function inactive. Do not assume that a displayed default is a sensor measurement.

Interpret the evidence you actually have
Observation Next check
Reader cannot connect at all Use the separate connection checklist; parameter interpretation comes later.
Codes and some live fields work, one field is unsupported Check vehicle/PID coverage before replacing hardware.
A field is available only in certain conditions Use the documented safe conditions; do not force a road test.
A plausible zero is repeatedly reported Retain the full label and state, then compare with service information.

Ask a question the seller can answer

“Does it have live data?” is too broad if your purchase depends on oil temperature, a particular pressure channel or a hybrid value. Give the exact vehicle, engine, model year and field. Ask for the named PID or manufacturer data channel, including whether it is generic or enhanced coverage.

For example, “2014 UK-market vehicle, engine code __; I need __ with units __” is a useful enquiry format. It is not a claim that this example car has a particular sensor. If the seller cannot confirm the essential channel, do not treat a screenshot from another car as coverage proof.

When another tool makes sense

A generic engine reader can remain useful for the fields the car does support. Manufacturer-specific battery, body or service data may require an enhanced tool or garage access. Keep the missing requirement specific so you do not replace a functioning reader with another device that has the same limitation.

Related decisions and sources

Record supported data safely while parked · Check the exact vehicle and protocol · Choose the diagnostic scope you need.

Technical references: OBD parameter reference. Generic parameter definitions do not establish availability on your exact vehicle.

If a generic engine reader fits your task

Confirm your exact vehicle and essential data first. The VD31 listing describes the supplied model and limits; check its current UK price and availability at Payverza only if that documented scope fits. A generic reader is not an all-system service tool.