Skip to content

ScanCar guides

Checking Petrol Emissions: OBD Reader or Exhaust Gas Test?

ScanCar editorial team · Updated 21 November 2026

An OBD reader does not measure the gases leaving the exhaust. It retrieves information reported by the vehicle, such as engine fault codes, supported sensor values and monitor status. If your question is whether a petrol car meets the prescribed exhaust-emissions limits, the appropriate gas test answers a different question from a code scan.

Start with the result you need

Two evidence paths for a petrol emissions concern
Your question Evidence to seek
Why is the engine-management lamp on? Codes, status and freeze frame, followed by diagnosis of the reported condition.
What are the measured exhaust emissions under the specified test? A suitable gas analyser and the correct vehicle/test conditions.
Have the controller's self-checks completed? Supported readiness information, interpreted separately from measured gas values.
Will the car pass the whole MOT? The prescribed inspection; neither a clean code list nor a private gas reading certifies every item.

Why a green screen is insufficient

No stored code is not a direct measurement of carbon monoxide, hydrocarbons or exhaust lambda. A readiness display says something about the controller's checks, not a complete tailpipe result. Conversely, a failed emissions measurement can need diagnostic investigation even when a basic reader offers little explanation.

Keep the actual test printout, vehicle details and any DTCs together. Ask the garage which test stage failed and under what conditions. Avoid buying a sensor from a gas value or code description alone: air leaks, fuelling, ignition, exhaust condition and other causes need the applicable diagnostic checks.

Choose what to own and what to book

A compatible basic reader can be useful for saving engine evidence before an appointment and after an actual repair. For an occasional regulated measurement, an appropriately equipped test or diagnostic service may be the useful purchase. The VD31's supported OBD functions do not turn it into an exhaust gas analyser.

Do not run an engine in an enclosed space or attempt to reproduce an emissions test by prolonged stationary revving. Follow the vehicle instructions and the test provider's procedure. A serious warning or unsafe symptom takes priority over collecting another number.

Related decisions and sources

Record supported data safely while parked · Check the exact vehicle and protocol · Choose the diagnostic scope you need.

Technical references: UK MOT emissions inspection manual · OBD parameter reference · VDIAGTOOL VD31 specification. Generic parameter definitions do not establish availability on your exact vehicle.

If a generic engine reader fits your task

Confirm your exact vehicle and essential data first. The VD31 listing describes the supplied model and limits; check its current UK price and availability at Payverza only if that documented scope fits. A generic reader is not an all-system service tool.