ScanCar guides
Mode 06 Results: What an On-Board Monitor Test Can Tell You
ScanCar editorial team · Updated 20 November 2026
Mode 06 normally concerns results of on-board monitoring tests; it is not the same as commanding a component. A reader menu called “component test” can be ambiguous. Establish whether you are viewing a stored monitor result or asking the vehicle to perform an operation before selecting anything.
A result needs its identity and limits
Where the vehicle and tool expose a monitor result, keep its monitor/test identifiers, description, measured or calculated value, units, limits and status together. A bare number without its scaling or test identity can be misleading. Unsupported or uninterpreted results should remain unknown.
The open-source command reference documents Mode 06 separately from current-data and DTC services, and explicitly limits its own implementation. This is useful terminology evidence, not validation of that library on your car or proof that a VD31 decodes every manufacturer test.
| Display | What it establishes |
|---|---|
| A completed result within displayed limits | The reported test outcome for its identified conditions, not the health of every related part. |
| A result outside limits | A reason to follow the engine's diagnostic procedure, not an automatic replacement order. |
| No result or unsupported | No usable result from this interface; not a zero or a pass. |
| A requested actuator operation | A different capability requiring exact coverage and a safe procedure. |
Retain context before clearing
Save associated codes and freeze frame, engine identity and when the result was observed. Clearing codes or changing adaptations can remove useful context or alter monitor state. A snapshot after clearing is not comparable with the original fault evidence unless the difference is documented.
Do not undertake a generic drive cycle just to fill a screen, and do not interpret a green monitor result as an MOT certificate. If a test needs specific operating conditions, use the vehicle's instructions or professional diagnosis rather than trying to force a fault on the road.
Buying check
Ask which Mode 06 results the exact reader decodes on your exact vehicle and whether it shows units and limits. “Ten OBD functions” alone does not answer that question. If you only need engine codes and freeze frame, do not pay for an advanced menu you cannot interpret or use safely.
Related decisions and sources
Record supported data safely while parked · Check the exact vehicle and protocol · Choose the diagnostic scope you need.
Technical references: OBD parameter reference · VDIAGTOOL VD31 specification. Generic parameter definitions do not establish availability on your exact vehicle.
If a generic engine reader fits your task
Confirm your exact vehicle and essential data first. The VD31 listing describes the supplied model and limits; check its current UK price and availability at Payverza only if that documented scope fits. A generic reader is not an all-system service tool.