Skip to content

ScanCar guides

Pending, Stored and Permanent OBD2 Codes Explained

ScanCar editorial team · Updated 19 November 2026

“Pending”, “stored” and “permanent” describe how a vehicle reports a diagnostic trouble code. They do not rank how dangerous the symptom is. Record which list showed the code, whether the warning lamp is lit and when the symptom occurred. Follow the handbook and the car's behaviour if you need to decide whether to stop.

Read the label beside the code

Pending
A monitor has detected a condition but it has not necessarily met the vehicle's confirmation criteria. Keep a record even if the lamp is off. Confirmation and disappearance depend on the monitor and whether it can run again.
Stored or confirmed
The car recorded a fault that met its criteria. Some tools use “stored” for several kinds of retained history. Record what the screen actually calls it and whether the symptom is present today.
Permanent, where supported
A record the vehicle manages after certain emissions faults. A normal clear command or battery disconnection does not remove it. After repair, the vehicle needs to run the relevant monitor and verify that the problem is gone. Timing varies; there is no universal mileage to clear it.

When the same code is shown twice

Example, for illustration: before repair, a generic engine code appears under stored and permanent. After repair the lamp is off, the stored list is empty and the same code still appears under permanent. Keep both reports and ask whether the relevant monitor has run and confirmed the repair. The two lists do not by themselves prove a second failure. If the code returns as pending or stored, or the symptom returns, ask for a further diagnosis.

When comparing reports, keep the date, odometer, code, code status and monitor availability on one line. Record “not supported” or “not shown” separately from an empty list. Reader labels and the menus a vehicle exposes can vary.

Use the right reference for your decision

The California Bureau of Automotive Repair's OBD reference explains why permanent codes are vehicle controlled. Its Smog Check rules do not apply to the UK. See what the UK MOT engine-light check actually covers for that separate question, and what to save before clearing a light if you are verifying a repair.