Practical guides
Calculated and Absolute Engine Load: Why OBD Percentages Differ
Identify the load PID and operating conditions. Engine-load percentages are not direct horsepower readings or a standalone test of engine wear.
Read the guide →Engine diagnostics · Read before you reset
Understand an engine warning, record the evidence and choose a compatible code reader. Practical UK guides to OBD2 checks and the limits of home diagnosis.
Practical guides
Identify the load PID and operating conditions. Engine-load percentages are not direct horsepower readings or a standalone test of engine wear.
Read the guide →Practical guides
Distinguish pedal input, commanded throttle and reported throttle position before treating a nonzero idle percentage as a fault.
Read the guide →Practical guides
Separate air mass flow from manifold absolute pressure, preserve the units and compare like-for-like conditions before buying an intake sensor.
Read the guide →Practical guides
Identify the sensor type, bank, position and units before interpreting an oxygen-sensor graph. Wideband and switching-sensor displays cannot share one voltage rule.
Read the guide →Practical guides
Keep fuel-trim bank, operating state and short/long-term values together. A correction percentage is evidence, not a diagnosis of an air leak or failed sensor.
Read the guide →Practical guides
Compare coolant and intake-air readings after a proper cold soak, retain units and engine state, and distinguish plausibility from an overheating diagnosis.
Read the guide →Practical guides
Record the module, complete code and vehicle revision before looking up a fault code. See when a generic description is not enough.
Read the guide →Practical guides
Check the vehicle's documented diagnostic protocol against the exact reader specification instead of relying on connector shape.
Read the guide →Practical guides
Combine a with-permission engine scan, a readiness check and official vehicle history. Know when to get an independent inspection.
Read the guide →Practical guides
Choose a few parameters, label the engine state and record repeatable observations without looking at a screen on the road.
Read the guide →Practical guides
Verify the exact controller and active test, along with software, gateway and licence requirements, before choosing a scan tool.
Read the guide →Practical guides
Check ABS and SRS coverage for your exact UK car and scanner. Use the enquiry checklist before ordering.
Read the guide →