Skip to content

ScanCar guides

Short and Long-Term Fuel Trim: What to Record Before Changing Parts

ScanCar editorial team · Updated 20 November 2026

Fuel trim describes a fuelling correction reported by the controller, not the amount of fuel in the tank or a percentage of sensor health. On a supported petrol engine, short-term and long-term trims can help a technician understand a mixture complaint. A single screenshot cannot identify which component caused it.

Keep the label with the number

Record short-term fuel trim (STFT), long-term fuel trim (LTFT), the bank number and fuel-system state. A positive correction generally means the control system is adding fuel relative to its base calculation; a negative correction means it is taking fuel away. STFT is the immediate correction, while LTFT reflects learned adaptation. Implementation and valid conditions must be checked against the engine's service information.

Do not compare Bank 1 on one screenshot with Bank 2 on another or call a missing second bank a fault. Some engines have only one applicable bank. Diesel strategies and manufacturer-specific data should not be interpreted using a generic petrol rule.

A usable fuel-trim note
Record Why it belongs in the same note
Exact DTC and freeze frame Connects the correction to the complaint rather than a different visit.
Engine warm/cold, RPM and fuel-system status Different operating states can make comparisons misleading.
STFT and LTFT for the same bank, with units Prevents one value being mistaken for the whole correction.
Any change in loads or symptoms Gives the garage context without claiming a cause.

A trend narrows questions, not a shopping list

A positive trim can be consistent with several conditions, including unmetered air or fuel delivery issues; it does not prove a vacuum leak. A negative trim does not automatically condemn an injector. A professional diagnosis may compare conditions and carry out independent tests. Do not spray flammable products into an intake or disconnect sensors simply to force a change.

For a parked observation, use the normal safe recording procedure and avoid repeated revving to chase a target percentage. There is no single pass/fail limit suitable for every car. Do not reset adaptations or erase codes before saving the original evidence.

Reader buying check

Ask for STFT/LTFT availability for the exact vehicle and the ability to keep labels visible. If you need recorded graphs, verify retention and export rather than assuming a graph remains after disconnection. A simple engine reader can collect supported generic values; fuel-pressure testing and manufacturer adaptations require other evidence or equipment.

Related decisions and sources

Record supported data safely while parked · Check the exact vehicle and protocol · Choose the diagnostic scope you need.

Technical references: OBD parameter reference. Generic parameter definitions do not establish availability on your exact vehicle.

If a generic engine reader fits your task

Confirm your exact vehicle and essential data first. The VD31 listing describes the supplied model and limits; check its current UK price and availability at Payverza only if that documented scope fits. A generic reader is not an all-system service tool.